Airtac x T1P GLK/AAP-01 Shotgun Shell HPA Adapter - PLUG AND PLAY (Black)

We’ve replicated an AAP01/GLK magazine, and adapted it to take HPA, fed by 30 round shotgun shells. 

• Easy access, yet low profile magazine release at the rear of the adapter.
• CNC Aluminium magazine baseplate with a choice of colours adding flair to your build!
• BB latch to prevent dropped BBs on reload (0 BBs are dropped when an empty shell is ejected).
• High internal volume for good FPS/PSI.
• Works best with CYMA Shotgun shells, available on the website.
• US Style Fitting as standard. EU Fitting available here
• This adapter comes fully assembled and ready to go. 

The adapter comes with a 15cm airline, which can be cut down to your preferred size, and a blackened Foster 22 (US Style) connector fitted.

This adapters magazine cutout is adjustable, allowing you to move the adapter up towards the nozzle of your gun for better cycling / stronger air seal. Included are 3 magazine catch cutout shims, marked 1 2 and 3. 1 is the 'lowest' and 3 is the 'highest' seal against the nozzle. They can be changed by removing the small screw in the side of the adapter which holds the shim in place. This can be useful for grips that are a bit out of spec such as the CTM FUKU lowers.

You will also be provided three feed tubes of different lengths. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results.

Shotshell HPA Adapter Information

• Sites that do not usually allow HPA adapters in pistols should have no problem with these adapters, due to their low capacity, and covert profile.
• Compatible with most airsoft shotshells. We recommend CYMA or Golden Eagle shells, as they have the strongest springs (TM Shells are not as good).
• 0 BBs are dropped when shell is empty (adapter will feed all 30 rounds of shell)
• An ambidextrous magazine catch is present at the rear of the adapter allowing easy shell drops
• Three feed tubes of different lengths are included. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results. This video demonstrates how simple this is