AirTac T1P CNC GLK/AAP to MP5 HPA Adapter

This CNC Aluminium HPA adapter lets you run CYMA MP5 mid-caps with your AAP/WE/G Series pistol. Its heavy skeletonisation, vivid anodisation and premium quality complement high-end builds.

This adapter does not come with a gas magazine fitted, but it is easy enough to fit your own :) 

BB Retention as standard.

CNC magazine catch is easily reachable by both hands.

The adapter also comes in our T1P Soft Case for ultimate protection. 

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE

MP5 HPA Adapter Info

• This magwell is made of CNC aluminium and cannot be damaged by BB strikes.
• Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window).
• BB Retention drops only 2 BBs when changing magazine

Fitment Instructions: This magwell has a rear shim and a feed tube spacer.
The feed tube shim fits under the feed tube. The rear shim is held in by two screws.

• Straight Magazines (Default Config) - Keep Shim In. Feed Tube spacer necessary on newer CYMA MP5 magazines
• Curved Long / Short Magazines - Remove rear shim. Keep Feed tube spacer in.
• If straight magazines will not feed with the rear shim and feed tube spacer installed, try removing the rear shim.
• In the very rare case short CYMA magazines do not fit your adapter, contact [email protected] (we can solve this for you ASAP)