AirTac Shotgun Shell HPA Adapter for Tokyo Marui MP7

TM MP7 Flat Hop Nub now included with every adapter!

Wanting to use a shotshell magazine with your TM MP7 GBBR? We’ve reverse engineered & manufactured our own short magazine, then put our awesome shotshell mechanism inside!

Comes pre-fitted with valve, feed lips, knocker and gas router - you do not need to use any donor parts. No assembly is required. This adapter is ready to go out the box.

A BB latch to prevent dropped BBs and simple push mag release on the rear of the adapter makes it an absolute dream to change shells.

Shotgun shells are almost the exact width of the MP7 grip. For the shells to eject well out of the adapter, you must remove the stickers from your shotgun shells, and gently lubricate the inside of your MP7s grip with a medium silicone oil.

Features:

• Lightweight magazine setup without an obvious HPA adapter aesthetic

• Modelled around a HK 30 round MP7 Magazine

• BB retention mechanism to reduce BB loss during magazine changes

We test each adapter in a Tokyo Marui MP7 before shipping.

The gas router for this adapter is made from injection moulded NBR rubber, to the standard MP7 spec and dimensions, meaning you can use a factory or aftermarket MP7 router should you wish. TM MP7 feed lips are also compatible with this adapter.

We utilise a very high flow valve. 

You will also be provided three feed tubes of different lengths. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results.

US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. 
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE

Shotshell HPA Adapter Information

• Sites that do not usually allow HPA adapters in pistols should have no problem with these adapters, due to their low capacity, and covert profile.
• Compatible with most airsoft shotshells. We recommend CYMA or Golden Eagle shells, as they have the strongest springs (TM Shells are not as good).
• 0 BBs are dropped when shell is empty (adapter will feed all 30 rounds of shell)
• An ambidextrous magazine catch is present at the rear of the adapter allowing easy shell drops
• Three feed tubes of different lengths are included. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results. This video demonstrates how simple this is