Airtac TM MWS Shotgun Shell HPA Adapter - PLUG AND PLAY

DOES NOT REQUIRE A DONOR MAGAZINE, JUST PLUG AND PLAY

Wanting to use a shotgun shell with your TM MWS? We’ve reverse engineered & manufactured our own magazine, then put our awesome shotshell mechanism inside!

A BB latch prevents dropped BBs (0 BBs dropped when shell is empty) and simple push mag release on the bottom the adapter makes it easy to change shells.

Features:

• Lightweight magazine setup without an obvious HPA adapter aesthetic

• Looks like a short smaller capacity M4 mag for DMR aesthetic

• BB retention mechanism to reduce BB loss during magazine changes

• US style fitting as standard

This adapter allows you to run HPA on your MWS / MWS clone

Comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required.

We test each adapter in a Tokyo Marui MWS before shipping.

This adapter is also compatible with 

1. Salvo Precision MCX Virtus
2. Any DOUBLE EAGLE MWS CLONE, including NOVESKE, AEROKNOX, GHETTO BLASTER
3. Any Guns Modify MWS / SCAR-L
4. Any Toxicant M4 pattern MWS 

Unless your MWS is made by CYMA, this is the adapter you should purchase

The gas router for this adapter is made from injection moulded rubber, to the standard MWS spec and dimensions, meaning you can use a factory or aftermarket MWS router should you wish. TM MWS feed lips are also compatible with this adapter.

We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.

A rear shim is included, which can be fitted to increase air seal (due to manufacturing tolerances between various brands of 'MWS' receiver)

Includes rear shim, one set of spare feed lips, a longer valve knocker for certain non TM MWS clones,  and all screws required to fit any of our modular magwell bases.

Shotshell HPA Adapter Information

• Sites that do not usually allow HPA adapters in pistols should have no problem with these adapters, due to their low capacity, and covert profile.
• Compatible with most airsoft shotshells. We recommend CYMA or Golden Eagle shells, as they have the strongest springs (TM Shells are not as good).
• 0 BBs are dropped when shell is empty (adapter will feed all 30 rounds of shell)
• An ambidextrous magazine catch is present at the rear of the adapter allowing easy shell drops
• Three feed tubes of different lengths are included. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results. This video demonstrates how simple this is