|
Airtac Vorsk VMP2 Rifle Style Shotgun Shell HPA Adapter (MODULAR) - PLUG AND PLAY
£90.00
Out Of Stock
SKU
AT-VMP2-RIFLESHOT
Free 2-3 Day delivery on Mainland UK orders over £100
Order before 3pm for same-day order processing
100% Secure Shopping
Why buy from BZ?
Airtac Vorsk VMP2 Rifle Style Shotgun Shell HPA Adapter (MODULAR) - PLUG & PLAY
Due to the success of the VMP1 HPA Adapter, Airtac has made this shortened version. Designed to match the aesthetics of the VMP2. This magwell has been constructed with CNC Aluminium, meaning it can’t be damaged by BB strikes.
Key Features
- Sites that do not usually allow HPA adapters in pistols should have no problem with these adapters, due to their low capacity, and covert profile.
- Compatible with most airsoft shotshells. Airtac recommends CYMA or Golden Eagle shells, as they have the strongest springs.
- 0 BBs are dropped when shell is empty (adapter will feed all 30 rounds of shell).
- An ambidextrous magazine catch is present at the rear of the adapter allowing easy shell drops.
- Three feed tubes of different lengths are included. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results.
How to Fit:
Step One
Remove the paddle latch. This allows the adapter to sit correctly against the magwell.
Step Two
Pull the bolt back and hold. Always make sure you pull the bolt back before inserting the adapter. This avoids damaging the nozzle.
Step Three
Ensure the catch is seated. The adapter fits pretty snug so, make sure the catch is correctly seated. You might need to manually push the side release in to avoid damaging the adapter.
Additional Information
If your Airsoft Rifle has an NPAS fitted, open it fully.
Do not exceed 150 PSI. Most Airsoft Guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
Insert the HPA adapter with your bolt/slide locked back to minimise pressure against the nozzle loading arm.
Compatibility
| Magazine Type | Compatibility |
| M4 | Yes |
| M4 (Angled) | Yes |
| MP5 | Yes |
| Shotshell (Pistol Style) | Yes |
| Shotshell (Rifle Style) | Yes |
| Remote Feed | Yes |
| Compact Drum | Yes |
*DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
*ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
*CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
*NEVER CONNECT TO PAINTBALL AIR TANKS OR CO2 TANKS.
*NEVER CONNECT TO A TIPPMAN STYLE HPA LINE.
| Brand | AirTac |
|---|