Airtac Hi-Capa/SSP1/SSP5 Drum Mag HPA Adapter

Airtac Hi-Capa/SSP1/SSP5 Drum Mag HPA Adapter

Features:

• Compatible with TM/WE/NOVRITSCH magazines
• Same capacity as the larger Armorer Works drum without the bulk and weight
• Fits up to the grip for a great aesthetic
• Includes single stack adapter
• US Style Fitting as standard

Drum Adapter Info

• Compatible with TM MP5/ TM SCORPION Drum Magazines
• Also compatible with Jing Gong VZ61 drums, though these can be hard to source
• 100+ BBs from a full wind
• Drum adapters include 2 25mm pins for installation of adapter onto drum

Key Information

• AirTac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting.
• Some of AirTac's HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
• If you need higher FPS, you can:
• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking
• If your replica has an NPAS fitted, AirTac advise opening it fully.
• Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

Additional Information

• DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
• ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
• CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
• NEVER CONNECT AIRTAC'S EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
• NEVER CONNECT AIRTAC'S EQUIPMENT TO A TIPPMAN STYLE HPA LINE