Airtac Archwick APC9K to Drum Mag HPA Adapter (Modular)

Airtac Archwick APC9K to Drum Mag HPA Adapter (Modular)

• This adapter allows you to run your Archwick APC9K on HPA.
• AirTac's drum base is compatible with TM MP5/Scorpion compact drums, offering a unique aesthetic perfect for any pistol calibre RIF as well as a capacity of 400 rounds.
• Requires gas router from a donor ACP9K magazine.
• Feed lips and our high flow valve are already installed.
• US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment).

*Drum mag not included with drum base.

Drum Adapter Info

• Compatible with TM MP5/ TM SCORPION Drum Magazines
• Also compatible with Jing Gong VZ61 drums, though these can be hard to source
• 100+ BBs from a full wind
• Drum adapters include 2 25mm pins for installation of adapter onto drum

Key Information

• AirTac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting.
• Some of AirTac's HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
• If you need higher FPS, you can:
• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking
• If your replica has an NPAS fitted, we advise opening it fully.
• Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

Additional Information

• DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
• ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
• CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
• NEVER CONNECT AIRTAC'S EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
• NEVER CONNECT AIRTAC'S EQUIPMENT TO A TIPPMAN STYLE HPA LINE