Airtac WE CT25 Drum HPA Adapter

£40.00

Out Of Stock

SKU

AT-CT25-DRUM

This quirky little adapter acts as an extended grip and lets you run a 400 round TM Drum in your WE CT25.
To install this adapter, you'll need a WE CT25 gas magazine.
Fit the included O ring to the base of the HPA adapter. Remove the baseplate of the gas mag, then use a hand clamp to compress the adapter onto the magazine shell, lining up and inserting the pins (fit the included O-ring ).
Fits weirdly well in the hand!
The CT25 cannot deal with too high PSI, as the slide returns to battery too fast for the next BB to cycle, you need to find a balance of PSI to feed.

AirTac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting.

Some of AirTac's HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.

If you need higher FPS, you can:

If your replica has an NPAS fitted, AirTac advise opening it fully.

Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.

Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE

More Information
Brand	AirTac