Airtac Vorsk VMP2 MP5 HPA Adapter (MODULAR) - PLUG AND PLAY

Airtac Vorsk VMP2 MP5 HPA Adapter (MODULAR) - PLUG AND PLAY

Due to the success of the VMP1 HPA Adapter, Airtac has made this shortened version. Designed to match the aesthetics of the VMP2. This magwell has been constructed with CNC Aluminium, meaning it can’t be damaged by BB strikes.

This VMP2 MP5 HPA Adapter has been injection moulded with Airtac's own gas router. Combined with their high flow valve and printed feed lips, this means no more donor mags. This HPA VMP2 HPA Adapter is compatible with all CYMA MP5 Mid Caps. BB Retention drops only 2 BBs when changing magazines.

How to Fit:

Step One

Remove the paddle latch. This allows the adapter to sit correctly against the magwell.

Step Two

Pull the bolt back and hold. Always make sure you pull the bolt back before inserting the adapter. This avoids damaging the nozzle.

Step Three

Ensure the catch is seated. The adapter fits pretty snug so, make sure the catch is correctly seated. You might need to manually push the side release in to avoid damaging the adapter.

Additional Information

• If your Airsoft Rifle has an NPAS fitted, open it fully.
• Do not exceed 150 PSI. Most Airsoft Guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt/slide locked back to minimise pressure against the nozzle loading arm.

Compatibility

*DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.

*ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).

*CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.

*NEVER CONNECT TO PAINTBALL AIR TANKS OR CO2 TANKS.

*NEVER CONNECT TO A TIPPMAN STYLE HPA LINE.