AirTac VFC AK74 to AK AEG Magazine Adapter - PLUG AND PLAY

AirTac VFC AK74 to AK AEG Magazine Adapter - PLUG AND PLAY

Introducing the new PLUG AND PLAY VFC AK74 to AK AEG Magazine Adapter from AirTac. Pre-fitted with an outlet valve, gas router and feed lips, there is no assemble required with this Mag Adapter.

The AirTac VFC AK74 to AK AEG Magazine Adapter comes with a number of shims that can be used to ensure snug fitment of your CYMA AK magazine. It also comes with a spare set of feed lips.

The AK74m's magazine catch may require manual manipulation for the first few insertions

AirTac's Magazine Adapters

Each of their adapters are designed to be low profile while reaching field limit FPS. All of their products are designed and manufactured to the highest standard. They also do not charge extra for ‘premium’ features. Where applicable this adapter features:

• Lifetime Warranty
• Injection Moulded or CNC Magwell that is impervious to BB strikes at point blank skirmish FPS.
• CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
• Tuneability/compatability via integrated shim systems.
• Gas Routers injection moulded from NBR, 1:1 with the factory gas router.

Tested by AirTac

AirTac do the legwork and make sure they test every adapter before they hit the shelves.

• Seal Test
• Firing Test, for feed & recoil

Compatibility

Plug & Play

This adapter is ready to go out of the box. Valve, feed lips, and gas router are already fitted to the adapter. You do not need to use any donor parts and no assembly is required.

Key Information

• Some of AirTac's adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
• If you need higher FPS, you can:
• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking
• If your replica has an NPAS fitted, AirTac advises opening it fully.
• Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

IMPORTANT

• DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
• ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
• CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
• NEVER CONNECT AIRTAC EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
• NEVER CONNECT AIRTAC EQUIPMENT TO A TIPPMAN STYLE HPA LINE.