AirTac Tokyo Marui MWS to MP5 HPA Adapter (MODULAR) - PLUG AND PLAY

AirTac Tokyo Marui MWS to MP5 HPA Adapter (MODULAR) - PLUG AND PLAY

Introducing the sleekest way to HPA your Tokyo Marui MWS, the AirTac Tokyo Marui MWS to MP5 HPA Adapter (MODULAR) - PLUG AND PLAY. AirTac have massively redesigned this HPA adapter to sit completely inside the magwell (no more sticking out), with an elegant two part magazine catch, and an adjustable side shim system for stability across all metal Cyma MP5 mid caps in ALL MWS/Clone receivers.

The AirTac Tokyo Marui MWS to MP5 HPA Adapter (MODULAR) - PLUG AND PLAY works excellently with the T1P HPA Dead Drop Grip. It also comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required.

Compatibility

AirTac make sure to test each adapter in a Tokyo Marui / DE MWS before they hit the shelves to make sure you're getting the best quality.

This adapter is also compatible with:

• Salvo Precision MCX Virtus
• Any DOUBLE EAGLE MWS CLONE, including NOVESKE, AEROKNOX, GHETTO BLASTER
• Any Guns Modify MWS / SCAR-L
• Any Toxicant M4 pattern MWS

Unless your MWS is made by CYMA, this is the adapter you for you.

Includes rear shim, one set of spare feed lips, one set of side shims, a longer valve knocker for certain non TM MWS clones, and all screws required to fit any of our modular magwell bases.

AirTac's Magazine Adapters

Each of their adapters are designed to be low profile while reaching field limit FPS. All of their products are designed and manufactured to the highest standard. They also do not charge extra for ‘premium’ features. Where applicable this adapter features:

• Lifetime Warranty
• Injection Moulded or CNC Magwell that is impervious to BB strikes at point blank skirmish FPS.
• CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
• Tuneability/compatability via integrated shim systems.
• Gas Routers injection moulded from NBR, 1:1 with the factory gas router.

Tested by AirTac

AirTac do the legwork and make sure they test every adapter before they hit the shelves.

• Seal Test
• Firing Test, for feed & recoil

Compact MP5 HPA Adapter Info

• This magwell sits hidden inside your guns magwell for a sleek aesthetic. It cannot be damaged by BB strikes.
• A two part magazine catch moves inline with the magazine catch cutout on the CYMA MP5 magazine for ultimate fitment.
• Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window).
• BB Retention drops only 2 BBs when changing magazine.

SHIM ADJUSTMENT INSTRUCTIONS

If a CYMA MP5 magazine seems too wide, remove one of the two side wings, using a 1.5mm hex key.

Some gentle filing of the shims can also be done to improve fitment in the case of CYMA MP5 mags that are stamped too wide.

If a straight MP5 magazine is not feeding or has too much vertical play, install the fitment block inside the magwell.

Key Information

• Some of AirTac's adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
• If you need higher FPS, you can:
• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking
• If your replica has an NPAS fitted, AirTac advises opening it fully.
• Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

IMPORTANT

• DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
• ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
• CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
• NEVER CONNECT AIRTAC EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
• NEVER CONNECT AIRTAC EQUIPMENT TO A TIPPMAN STYLE HPA LINE.