Airtac Tokyo Marui MP7 MP5 HPA Adapter (Modular) - PLUG AND PLAY

Airtac Tokyo Marui MP7 MP5 HPA Adapter (Modular) - PLUG AND PLAY

The Airtac Tokyo Marui MP7 MP5 HPA Adapter allows you to run HPA on your Tokyo Marui MP7. This adapter comes pre-fitted with valve, feed lips, knocker and gas router so, you do not need to use any donor parts.

Airtac’s MP5 bases come with a CNC release and feed tube and built in adjustability. Your adapter will come with a number of shims that can be used to ensure snug fitment of your MP5 magazine. MP5 magazines result in a more ‘covert’ HPA aesthetic, often mirroring the same profile as extended magazines.

The gas router for this adapter is made from injection moulded NBR rubber, to the standard MP7 spec and dimensions. This means you can use a factory or aftermarket MP7 router should you wish. TM MP7 feed lips are also compatible with this adapter.

Plug and Play

This adapter is ready to go out of the box. Valve, feed lips, and gas router are already fitted to the adapter. You do not need to use any donor parts.

No assembly is required.

MP5 HPA Adapter Info

• This magwell is made of CNC aluminium and cannot be damaged by BB strikes.
• Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window).
• BB Retention drops only 2 BBs when changing magazine
• Tuneability/compatibility via integrated shim systems. Our adapters are designed to cope with 'airsoft tolerances'

Fitment Instructions:

This magwell has a rear shim and a feed tube spacer. The feed tube shim fits under the feed tube. The rear shim is held in by two screws.

• Straight Magazines (Default Config) - Keep Shim In. Feed Tube spacer necessary on newer CYMA MP5 magazines
• Curved Long/Short Magazines - Remove rear shim. Keep Feed tube spacer in.
• If straight magazines will not feed with the rear shim and feed tube spacer installed, try removing the rear shim.

Key Information

• Airtac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting. EU fittings can be purchased separately.
• Some of Airtac’s HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
• If you need higher FPS, you can:
• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking
• If your replica has an NPAS fitted, Airtac advise opening it fully.
• Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt/slide locked back to minimise pressure against the nozzle loading arm.

Run Different Mags with Your Adapter

This adapter is also compatible with the following modular magwells. It's a great way to change up your playstyle and aesthetic!

Compatible with:

• M4
• M4 (Angled)
• MP5
• Shotshell (Pistol Style)
• Shotshell (Rifle Style)
• Remote Feed
• Compact Drum

Not Compatible with KWA MP7.