AirTac Tokyo Marui AKM/ AKX to AEG AK HPA ADAPTER - PLUG AND PLAY

AirTac Tokyo Marui AKM/ AKX to AEG AK HPA ADAPTER - PLUG AND PLAY

This adapter allows you to use PLASTIC CYMA AK MID CAP AEG magazines with your TM AKM or AKX.

No modification to your rifle is needed. No donor mag is needed either, as comes with feed lips, gas router and valve.

Full Auto feeds and works excellently. Expect PSI of ~100 to reach field limits.

CYMA AK AEG magazines are available on our website, under the magazines section

AIRTAC Adapters

Each of AirTac's adapters is designed to be low profile while reaching field limit FPS. They design and manufacture all of their products to the highest standard, and do not charge extra for ‘premium’ features. Where applicable this adapter features:

• Lifetime Warranty
• Injection moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS.
• CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
• Tuneability/compatability via integrated shim systems. Our adapters are designed to cope with 'airsoft tolerances'
• Gas Routers injection moulded from NBR, 1:1 with the factory gas router.

AirTac test every HPA adapter they produce

• Seal Test
• Firing test, for feed and recoil

Key Information

AirTac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting.

Some of AirTac's HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150. If you need higher FPS, you can:

• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking

If your replica has an NPAS fitted, AirTac advise opening it fully.

Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.

Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

IMPORTANT INFORMATION

• DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
• ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
• CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
• NEVER CONNECT AIRTAC'S EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS
• NEVER CONNECT AIRTAC'S EQUIPMENT TO A TIPPMAN STYLE HPA LINE