AirTac TM AKM/AKX 2000 Round HPA Drum Mag - PLUG AND PLAY

AirTac TM AKM/AKX 2000 Round HPA Drum Mag - PLUG AND PLAY

This is a 2000 Round LCT Drum, with a high quality AIRTAC HPA Adapter built into it. You just need to simply install batteries, pour in BBs, push the front winding button down, and go have fun.

Includes a spare set of feed lips and batteries are included!

AIRTAC Adapters

Each of AirTac's adapters is designed to be low profile while reaching field limit FPS. AirTac design and manufacture all of their products to the highest standard, and do not charge extra for ‘premium’ features.

Where applicable this adapter features:

• Lifetime Warranty
• Injection Moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS.
• CNC or Injection Moulded Feed Tubes & Magazine Catches for lifelong durability.
• Tuneability/Compatability via integrated shim systems.
• Gas Routers injection moulded from NBR, 1:1 with the factory gas router.

AirTac Test Every HPA Adapter They Make

• Seal Test
• Firing test, for feed and recoil (we have over 100 guns on site for testing)

Plug and Play

This adapter is ready to go out of the box. Valve, feed lips, and gas router are already fitted to the adapter. You do not need to use any donor parts and no assembly is required.

Key Information

• AirTac use a US Foster Fitting as standard, the most common airsoft HPA fitting.
• Some of their HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
• If you need higher FPS, you can:
• Fit a tighter barrel
• Use a longer barrel
• Use heavier BBs
• Fit an improved hop bucking
• If your replica has an NPAS fitted, we advise opening it fully.
• Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
• Insert the HPA adapter with your bolt/slide locked back to minimise pressure against the nozzle loading arm.

IMPORTANT INFORMATION

• DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER
• ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS)
• CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER
• NEVER CONNECT AIRTAC'S EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS
• NEVER CONNECT AIRTAC'S EQUIPMENT TO A TIPPMAN STYLE HPA LINE