AirTac KWA/KSC/ASG MP9/TAC-9 Drum Mag HPA Adapter - PLUG AND PLAY
AirTac are achieving 1J@100psi on a 0.25g BB. This means heavier BBs or higher PSI will put you way into or above UK field limits and closer to DMR (you can go up to 130PSI on this adapter). The adapter cycles well down to 80PSI.
Features
PLUG AND PLAY - AirTac injection moulded their own gas router for this adapter, and combined it with their high flow valve and printed feed lips. This means no more donor mags!
CNC Valve Collar (This means no valve on plastic thread, for a FAR more durable adapter)
US HPA FITTING as standard
Rack your gun before insertion of the adapter
Lifetime warranty
INSTALLATION
A donor mag is required to build this adapter. You will need to remove the gas valve, feed lips, gas router and valve knocker from your gas magazine, and install them onto the AirTac adapter.
AirTac pressure test each adapter before shipping, to ensure that your valve will drop straight in and seal! AirTac require donor parts to ensure absolute compatibility with your RIF.
CONFIGURATIONS
MODULAR ADAPTER TOP
This is the 'top' part of the modular HPA adapter, and is available for purchase so you can use your existing modular bases, saving you money!
M4
Compatible with most M4 magazines, works best with PTS EPM1. Your adapter will come with a number of shims that can be used to ensure snug fitment of your M4 magazine.
MP5
Compatible with all CYMA MP5 Mid Cap Magazines
SHOTGUN SHELL
Compatible with CYMA Shotgun Shells and some other brands
DRUM BASE
Allows your HPA adapter to be used with a Tokyo Marui MP5 or VZ61 drum (or a Well/Jing Gong one if you can find them). The drum itself can be purchased separately here
AIRTAC Adapters
Each of AirTac's adapters is designed to be low profile while reaching field limit FPS. They design and manufacture all of their products to the highest standard, and do not charge extra for ‘premium’ features. Where applicable this adapter features:
Lifetime Warranty
Injection moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS.
CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
Tuneability/compatability via integrated shim systems. AirTac adapters are designed to cope with 'airsoft tolerances'
Gas Routers injection moulded from NBR, 1:1 with the factory gas router.
All of AirTac's adapters are tested before they are shipped to ensure the highest quality
Seal Test
Firing test, for feed and recoil (we have over 100 guns on site for testing)
Plug and Play
This adapter is ready to go out of the box. Valve, feed lips, and gas router are already fitted to the adapter. You do not need to use any donor parts and no assembly is required.
Key Information
AirTac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting. EU fittings can be purchased separately.
Some of AirTac's HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
If you need higher FPS, you can:
Fit a tighter barrel
Use a longer barrel
Use heavier BBs
Fit an improved hop bucking
If your replica has an NPAS fitted, we advise opening it fully.
Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.
IMPORTANT INFORMATION
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT AIRTAC EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT AIRTAC EQUIPMENT TO A TIPPMAN STYLE HPA LINE