AirTac ASG / KJW USW / CZ SHADOW 2 to Angled M4 HPA Adapter - PLUG AND PLAY
Run M4 AEG magazines on HPA with your Shadow 2 / USW. Fully plug and play.
Rack your pistol before inserting this adapter.
AIRTAC Adapters
Each of AirTac's adapters is designed to be low profile while reaching field limit FPS. AirTac design and manufacture all of their products to the highest standard, and do not charge extra for ‘premium’ features. Where applicable this adapter features:
Lifetime Warranty
Injection moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS.
CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
Tuneability/compatability via integrated shim systems. Our adapters are designed to cope with 'airsoft tolerances'
Gas Routers injection moulded from NBR, 1:1 with the factory gas router.
AirTac test every HPA adapter they sell
Seal Test
Firing test, for feed and recoil
Plug and Play
This adapter is ready to go out of the box. Valve, feed lips, and gas router are already fitted to the adapter. You do not need to use any donor parts with no assembly is required.
M4 Adapter Information
Injection moulded from polycarbonate, this magwell is near indestructible!
Compatible with most airsoft M4 magazines.
AirTac recommend EPM1/EPM1s magazines as they have excellent fitment and strong springs.
Magazines advertised as Fast Feed such as the original EPM or Amarok magazines will also work well
BB retention means only 2-3 BBs are dropped when changing mag
A swappable rear shim is included
Please note only 2 screws are required to attach the modular magwell, some adapters may have more
Key Information
AirTac use a US Foster Fitting as standard. This is the most common airsoft HPA fitting.
If you need higher FPS, you can:
Fit a tighter barrel
Use a longer barrel
Use heavier BBs
Fit an improved hop bucking
If your replica has an NPAS fitted, AirTac advise opening it fully.
Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.