|
AirTac Angled AAP-01/GLK HPA Adapter
£40.00
In Stock
SKU
AT-AAPANGLED-M4
Free 2-3 Day delivery on Mainland UK orders over £100
Order before 3pm for same-day order processing
100% Secure Shopping
Why buy from BZ?
The perfect HPA adapter for CQB and speedsofters! The angled adapter runs the M4 magazine parallel to your wrist for a smaller vertical profile.
Manufactured from impact-resistant Nylon 12 and Injection Moulded Polycarbonate
Fitting a Gas Magazine
To fit a gas magazine, use a 1.5mm hex key and unscrew the four screws on the inside of the M4 magwell (they are arranged in a square pattern).
Fit the included O ring to the top of the gas block of the adapter, in the O-Ring groove
You will then be able to access the screw hole needed to screw the adapter onto your gas magazine.
What if I have an EU line?
If you have an EU line, you can buy an EU fitting for the adapter here. Just unscrew the US fitting using a 3mm hex key, and screw in the EU fitting.
Package Contents
- GLK Modular Top
- GLK Single Stack
- Angled Adapter Base
- 2*Magazine O-Rings
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE
| Brand | AirTac |
|---|